We all want to maintain that perfect, shiny gleam on the surfaces of our phones. To keep it that way, investing in the best screen protector is necessary. It is one of the most important accessories you should have which will protect your screen from scuffs, scratches and even cracks.

Applying a tech21 Impact Shield Anti-Glare for Samsung Galaxy S10 from Tech21 on Vimeo.

Tech21 Impact Shield screen protector is available in Self-Heal, Glass (tempered glass) and Anti-Scratch. They provide the best protection for your screen whilst being responsive and do not compromise the clarity of the screen.

Impact Shield Self-Heal is hard to believe but true to its name. It’s built with a super-unique formula that magically smooths out nasty scruffs and scratches.

Albeit the Impact Shield Anti-Scratch is ultra-thin, it’s packed with layers of scratch-resistant protection. Impact Shield Glass is our favourite. This tempered glass screen protector is slightly thicker but tough. It feels smooth to the touch, like your original screen but is scratch and fingerprint resistant. It will be more expensive, but it is worthwhile.

What comes with my Impact Shield screen protector

  • Wet wipe

  • Microfibre cloth

  • Dust removal sticker

  • Complementary alignment applicator

  • Squeegee

  • Tab marked screen protector

Before you begin

Find dust-free environment with minimal disturbance from the wind. It is best to find somewhere indoors with a flat work surface such as a desk or a table. Wash and dry your hands too. And now let’s begin!

Step 1: Cleaning the screen

Place your phone down on your flat desk and clean its screen with the wet wipe. Next, use the microfibre cloth to wipe it dry. Leave it for a few seconds to completely dry.

Then,  slide in the complementary alignment applicator. Ensure that the panel of the alignment applicator is on the back of your phone.

Step 2: Apply screen protector

Remove your screen protector from the packaging and hold it up. Pull out tab marked ‘1’ and place the sticky side onto the screen of your phone. Stick according to the guide of the alignment. It will ensure that your screen protector is positioned perfectly on your screen. When it’s done, pull out the alignment applicator.

Step 3: Remove other tabs and smooth out bubbles

Slowly pull out tab marked ‘2’, gently press the screen protector down and smooth it out with the squeegee. Smooth out any bubbles. Repeat the same with tab marked ‘3’ and smooth out and bubbles. Finally, gently remove tab marked ‘4’ and you’re done!

Can you re-apply a screen protector? The answer is yes, if the adhesive layer is not damaged. Make sure that your fingers are dust-free by using the dust removal sticker.

Starting from any edge of your screen protector, use the opposite end of the squeegee to slowly peel and gently lift the screen protector. Clean the screen and screen protector with the wet wipe. Use the microfibre cloth to dry the surface of the screen. While waiting for the screen to dry, slide in the alignment applicator and gently re-apply the screen protector. Remove the applicator and smooth out any bubbles with the squeegee. This method works for tempered glass screen protectors too.

Cleaning your screen protector

Dirt, dust and trapped debris can gather in your tempered glass screen protector making it look like your screen is marred.

Using your credit card, carefully peel and gently lift the screen protector. Then using a solution of mild dish and water, sponge it over the front of the screen protector then wipe it dry with a soft cloth.

For the sticky side of screen protector, place strips of packing tape across the tempered glass. Peel them off slowly, removing the dust and dirt in the process. Remove all the tape strips then gently place the screen protector back onto the cleaned surface of your phone screen.

There’s nothing worse than a scratched screen, so don’t take your chances. Tech21 Impact Shield screen protector provides the ultimate protection for your devices. Available for selected iPhone 11, Samsung S and Note and Google Pixel range!

FAQs

  • Are screen protectors worth it? Do I need it? Is it necessary?

  • Yes! If you’re glued to your phone for hours every day, do not compromise it by not having the best screen protector. Although advances in glass and coatings on screens have been cutting-edge, it can still be scratched (sometimes by a single grain of sand in your pocket!). There’s nothing worse than a scratched screen, so don’t take your chances.

  • Film or tempered glass? Which is the best screen protector for my phone?

  • It depends on what you’re looking for. Film lasts longer, glass looks better. All screen protectors provide an extra layer of protection for your screen. If you tend to drop your phone a lot, or have kids treat your £800 iPhone like a throwable toy, then go with film. Other than that, go with tempered glass.
    Tech21 Impact Shield screen protector is available in Self-Heal, Glass (tempered glass) and Anti-Scratch. They provide the best protection for your screen whilst being responsive and do not compromise the clarity of the screen. Impact Shield Self-Heal is hard to believe but true to its name. It’s built with a super-unique formula that magically smooths out nasty scruffs and scratches. Impact Shield Glass is our favourite. This tempered glass screen protector is slightly thicker but tough. It feels smooth to the touch, like your original screen but is scratch and fingerprint resistant. It will be more expensive, but it is worthwhile. Albeit the Impact Shield Anti-Scratch is ultra-thin, it’s packed with layers of scratch-resistant protection.

  • Do tempered glass screen protectors really work? Is It good for my phone?

  • Tempered glass screen protectors are typically thicker but tough and robust. It feels smooth to the touch, like your original screen. Not only it offers better protection than film protectors, it is scratch and fingerprint resistant. It will be more expensive, but it is worthwhile.

  • Do screen protectors prevent cracks?

  • Screen protectors help protect screens from scratches which weaken the structural display of your phone. If left without protection, it may lead up to larger scratches and even cracks. It’s beneficial to get your screen protected but don’t expect them to save your phone if it suffers from serious bashings (reality check!)

  • How to apply a glass screen protector?

  • Make sure that you find a non-dusty environment. Place your phone down on a flat desk and clean its screen with wet wipe. Next, use a microfibre cloth to wipe it dry. Remove your screen protector from its packaging and position it over the screen to check alignment and clearance of camera spots/microphone holes. Carefully peel back the screen protector’s backing and place the sticky side onto the screen of your phone. Using a flat card like your credit card, smooth out any bubbles. Refer our ‘How to screen protector’ blog. This method works for tempered glass screen protectors too!

  • Can you remove a screen protector?

  • Yes, you can. Using a flat card like your credit card will do the trick. Start off from any edge, gently peel the screen protector up with the credit card and slowly lift the screen protector. Use a wet wipe to clean your screen followed by a microfibre cloth. Now your screen is ready for a new screen protector.

  • Can I re-apply my screen protector?

  • If the adhesive layer is not damaged, then it should be alright! Starting from any edge of your screen protector, use a flat card like your credit card to slowly peel and gently lift the screen protector. Clean the screen and screen protector with the wet wipe. Use a microfibre cloth to dry the surface of the screen. Gently re-apply the screen protector and smooth out any bubbles with your credit card.

We also offer toughened glass Impact Shield screen protectors to keep your screens safe from harm...

 

How to Apply your Impact Shield Screen Protector

Application Instructions for your Impact Shield Screen Protector Follow the instructions below, together with our brand new application video to ensure that you get the most out of your multi-layered screen protector.

  1. To begin with, clean the screen of your gadget thoroughly removing all dust and oil.

  2. Fit the applicator to your smartphone. The applicator helps you to line up your Impact Shield accurately with your screen.

  3. Peel away “Tab 1” of your Impact Shield. This reveals the sticky side of your screen protector.

  4. Align Impact Shield to your gadget.

  5. Apply pressure to the centre of Impact Shield for OneTouch adhesive.

  6. Carefully remove the applicator and let the Impact Shield settle across your screen.

  7. Remove excess bubbles using the squeegee provided

  8. Remove “Tab 2” of the Impact Shield, and your application is complete.

You can find our range of screen protectors for iPhone here.